Determination of ring dimension
The dimensions marked on the rings in the webshop indicate the inner circumference of the ring. The table below can help you choose the right size.
You can determine the size in two ways.
Using a tape measure or strip of paper, if you bend it around like a ring and pull it up on your finger. Mark it and then unwrap it to measure it. When measuring, tighten the tape so that you do not choose a larger size. When measuring, also take into account the size of the joints, because the ring must be pulled through them as well. Based on the measurement results, you can select the size for the inner circumference of the ring from the table.
You can also determine the appropriate ring size by measuring the inside diameter of one of your existing rings. You can measure the inside diameter of the ring as accurately as possible with a caliper.
In the webshop, you can select the appropriate size from the drop-down bar next to the specific ring.
If any of the sizes are not listed, select the unique option and write the desired size in the comments section of the order form. The time to make the ring in this case is 30 working days.
If you can’t choose the right size, email me at konyssa@konyssa.com and I’ll help!
|
RING SIZE |
INNER DIAMETER OF THE RING |
INNER CIRCUMFERENCE OF THE RING |
|
48 |
15,3 mm |
48,0 mm |
|
49 |
15,6 mm |
49,0 mm |
|
50 |
15,9 mm |
49,9 mm |
|
51 |
16,2 mm |
50,9 mm |
|
52 |
16,5 mm |
51,8 mm |
|
53 |
16,8 mm |
52,8 mm |
|
54 |
17,2 mm |
54,0 mm |
|
55 |
17,5 mm |
55,0 mm |
|
56 |
17,8 mm |
55,9 mm |
|
57 |
18,1 mm |
56,9 mm |
|
58 |
18,4 mm |
57,8 mm |
|
59 |
18,8 mm |
59,1 mm |
|
60 |
19,1 mm |
60,0 mm |
|
61 |
19,4 mm |
60,9 mm |